R6 Siege to CS2 sensitivity converter
Enter your Rainbow Six Siege sensitivity and DPI to get the Counter-Strike 2 sens that turns the exact same distance. To convert by hand, divide your R6 Siege sens by 3.8397 (or multiply by 0.2604).
Formula
R6 Siege to CS2 formula
CS2 sens = R6 Siege sens × 0.260435Rainbow Six Siege turns 0.00572958° per mouse count at sensitivity 1; Counter-Strike 2 turns 0.022°. The ratio of the two, 0.00572958 ÷ 0.022, is the multiplier. It holds at any DPI as long as you use the same DPI in both games.
R6 Siege: Assumes the default MouseSensitivityMultiplierUnit of 0.02 in GameSettings.ini. Siege only accepts whole numbers.
Chart
R6 Siege to CS2 sens chart
At 800 DPI in both games.
| R6 Siege sens | CS2 sens | cm / 360° | eDPI (R6 Siege) |
|---|---|---|---|
| 5 | 1.302 | 39.9 | 4000 |
| 6 | 1.563 | 33.2 | 4800 |
| 8 | 2.083 | 24.9 | 6400 |
| 10 | 2.604 | 19.9 | 8000 |
| 12 | 3.125 | 16.6 | 9600 |
| 15 | 3.907 | 13.3 | 12000 |
| 18 | 4.688 | 11.1 | 14400 |
| 20 | 5.209 | 10 | 16000 |
Converting from
Sensitivity in Rainbow Six Siege
Also applies to Siege X
Rainbow Six Siege splits sensitivity into separate horizontal and vertical sliders; keep both equal so vertical aim matches. ADS speed is set per zoom level, and the FOV slider does not change hipfire turn speed.
- Where to set it
- Options → Controls → Mouse → Mouse Sensitivity Horizontal / Vertical
- Common range
- 5–10 at 800 DPI (20–40 cm/360°)
Converting to
Sensitivity in Counter-Strike 2
Also applies to CS:GO
Counter-Strike 2 keeps the classic Source yaw of 0.022° per count (the m_yaw value), which is why its numbers carry over to Apex and TF2 unchanged. Raw input is always on, the field of view is fixed, and scoped speed is set separately with zoom_sensitivity_ratio.
- Where to set it
- Settings → Keyboard / Mouse → Mouse Sensitivity, or
sensitivityin the console - Common range
- 0.8–1.5 at 800 DPI (35–65 cm/360°)
Ranges compared
Where R6 Siege players land in CS2
Competitive R6 Siege players mostly use 5–10 at 800 DPI, which converts to CS2 1.302–2.604. CS2 players typically sit at 0.8–1.5, so most R6 Siege players land on the fast side in CS2. Plenty keep it that way: your muscle memory matters more than matching everyone else.
FAQ
R6 Siege to CS2 sens questions
How do I convert R6 Siege sens to CS2?
To keep the same feel, divide your R6 Siege sens by 3.8397 (or multiply by 0.2604). At the same DPI, R6 Siege 10 equals CS2 2.604. If you play CS2 at a different DPI, enter both DPIs in the converter above and it compensates.
What is R6 Siege 10 in CS2?
R6 Siege 10 at 800 DPI is CS2 2.604 at 800 DPI (exactly 2.60435). Both need 19.9 cm of mouse movement for a full 360° turn.
Is R6 Siege sensitivity the same as CS2?
No. R6 Siege turns 0.00573° per mouse count at sensitivity 1 and CS2 turns 0.022°, so the same number in CS2 is 3.84× faster. That is why you need to convert.
Where do I change sensitivity in Counter-Strike 2?
Settings → Keyboard / Mouse → Mouse Sensitivity, or sensitivity in the console.
Why does CS2 feel different at the converted sens?
The converted value matches your 360° distance exactly, but R6 Siege and CS2 use different fields of view and camera setups, so targets can appear to move at a different speed on screen. Make sure mouse acceleration is off in both games and in Windows, then give it a few sessions before tweaking.
More conversions