Formula
CoD to TF2 formula
TF2 sens = CoD sens × 0.3Call of Duty turns 0.0066° per mouse count at sensitivity 1; Team Fortress 2 turns 0.022°. The ratio of the two, 0.0066 ÷ 0.022, is the multiplier. It holds at any DPI as long as you use the same DPI in both games.
CoD: Leave ADS sensitivity multiplier at 1.00 with the Relative transition to keep ADS consistent with hipfire.
Chart
CoD to TF2 sens chart
At 800 DPI in both games.
| CoD sens | TF2 sens | cm / 360° | eDPI (CoD) |
|---|---|---|---|
| 3 | 0.9 | 57.7 | 2400 |
| 4 | 1.2 | 43.3 | 3200 |
| 5 | 1.5 | 34.6 | 4000 |
| 6 | 1.8 | 28.9 | 4800 |
| 7 | 2.1 | 24.7 | 5600 |
| 8 | 2.4 | 21.6 | 6400 |
| 9 | 2.7 | 19.2 | 7200 |
| 10 | 3 | 17.3 | 8000 |
Converting from
Sensitivity in Call of Duty
Also applies to Warzone, Black Ops 7, Black Ops 6, MW3
Modern Call of Duty uses the same 0.0066° yaw as Overwatch 2 and Destiny 2 for hipfire. ADS speed depends on the ADS multiplier, Monitor Distance Coefficient and whether ADS field of view is Affected or Independent, so leave those at default until hipfire feels right.
- Where to set it
- Settings → Controller/Mouse → Mouse → Mouse Sensitivity
- Common range
- 4–8 at 800 DPI (22–43 cm/360°)
Converting to
Sensitivity in Team Fortress 2
Team Fortress 2 runs on the original Source engine with the classic 0.022° yaw shared by CS2 and Apex. Set m_rawinput 1 to bypass Windows pointer settings; fov_desired (up to 90) changes how fast things look on screen but not your 360° distance.
- Where to set it
- Options → Mouse → Mouse sensitivity, or
sensitivityin the console - Common range
- 1.5–3.5 at 800 DPI (15–35 cm/360°)
Ranges compared
Where CoD players land in TF2
Competitive CoD players mostly use 4–8 at 800 DPI, which converts to TF2 1.2–2.4. TF2 players typically sit at 1.5–3.5, so a typical CoD sens lands inside the usual TF2 range once converted.
FAQ
CoD to TF2 sens questions
How do I convert CoD sens to TF2?
To keep the same feel, divide your CoD sens by 3.3333 (or multiply by 0.3). At the same DPI, CoD 6 equals TF2 1.8. If you play TF2 at a different DPI, enter both DPIs in the converter above and it compensates.
What is CoD 6 in TF2?
CoD 6 at 800 DPI is TF2 1.8 at 800 DPI (exactly 1.8). Both need 28.9 cm of mouse movement for a full 360° turn.
Is CoD sensitivity the same as TF2?
No. CoD turns 0.0066° per mouse count at sensitivity 1 and TF2 turns 0.022°, so the same number in TF2 is 3.33× faster. That is why you need to convert.
Where do I change sensitivity in Team Fortress 2?
Options → Mouse → Mouse sensitivity, or sensitivity in the console.
Why does TF2 feel different at the converted sens?
The converted value matches your 360° distance exactly, but CoD and TF2 use different fields of view and camera setups, so targets can appear to move at a different speed on screen. Make sure mouse acceleration is off in both games and in Windows, then give it a few sessions before tweaking.
More conversions